Bondic And JB Weld Comparison: Best Liquid Plastic Welder

Bondic And JB Weld Comparison: Best Liquid Plastic Welder

Confused about which gluing solution to buy between Bondic and JB Weld? We here give a detailed comparison between the both so that you can select the one which suits your requirements the most. Liquid Plastic Welders are really a thing in today’s time.

Our hectic schedules often make us mishandle things where we tend to break or damage things in a hurry. This is where liquid plastic welders come into the picture. They are easy to use, effective, and do not create a mess, unlike super glue does. 

But its use is not just limited to fixing the damaged or broken things. If you are someone very much indulged in the repairs or DIY projects, then liquid plastic welders are a thing for you too. Here in this article, we will be comparing two such products that are literal game-changers viz Bondic And JB Weld.

So let us get started and keep reading till the end to know who wins this.

About Bondic

Bondic Usage

Bondic is one of the most effective and easy-to-use liquid plastic welders that dries only when cured with the UV light. This means you get enough time to position and reposition the broken joints to the position you desire. It works on almost any surface or material you want, like the glass, wire, or fabric.


  1. A Versatile Product

Bondic is one of the most versatile products in the market that can work on almost any surface or material. It just takes a few seconds once cured with the UV light for creating a permanent joint.

  1. A Durable Product

Bondic has the capacity of lasting for a really long period of time and under extreme temperature or pressure. This long-lasting solution fixes your broken things and gives them a new life.

  1. It Is Clean

Bondic does not create a mess, unlike a super glue. It is clean and also gives you a smooth finish. Like an ordinary super glue, it does not stick to your fingers and create a mess. 

  1. Dry It As You Like: Bondic dries only when you want it to dry because it dries only when cured with UV light. 

Pros and Cons

  • Bondic does not have any of the toxic chemicals and is thus super safe to use. 
  • It is not messy, and even if you spill it by any chance, all you need to do is wipe it off with a wet cloth.
  • It dries only after you expose UV light on it for about four seconds. Thus you can adjust the position till you do not get what you desire.
  • The steps are super easy to follow and create quick and long-lasting fixes. Bondic claims to create a bond stronger than that of the original product.
  • It can work on various materials like glass, fabrice, plastic, and metal. 
  • It has a really strong smell to it. 

About JB Weld

An image of JB Weld

JB Weld is considered to be one of the best ways of mending the mental joints, but its use is not limited up to that. It can work well for other materials as well like wood and plastic. The solution can form permanent and robust bonds that can withstand extreme temperatures and high pressure making it perfect for repairing even the automotive parts.


  1. It Is Easy To Use: Though you might need to prepare the surface you want to work on quite thoroughly but is way easier as compared to welding.  
  1. It Can Form Permanent Bond

JB Weld Creates a permanent bond, and the only way you can remove it after curing it is by grinding it away by a Dremel tool or drill. The bond formed is thus as strong and durable as metal.

  1. Extremely Resistant To The Temperature

What makes JB weld so incredible is the fact that it can sustain well even at the highest of temperature and has the capacity of withstanding consistently high temperatures of 287 degree celsius as it is completely cured. Not only the high temperatures, but JB Weld can also work well even at the low temperatures of about -55 Degree Celsius, making it fit for both indoors and outdoor use.

  1. It Is Versatile And Durable

Once a surface is cured by JB Weld, it is waterproof, extremely temperature resistant, electrically insulating, and will not degrade when exposed to petroleum products including gasoline, diesel, and engine oil, as well as most solvents. Even acetone is incapable of degrading JB Weld. The only way you can be removing it is mechanically and thus makes it perfect for both indoors as well as outdoor setups in any condition.

Pros And Cons

  • It is non-toxic. 
  • The product can work on any metal. 
  • It is resistant to extreme temperatures, oil, gasoline, and other solvents.
  • You can drill, file, and ground it according to your need. 
  • It can work well on almost any metal. 
  • It takes a bit longer to cure.
  • Does not work well with plastic material.
  • It cannot bond to the flexible materials.

Wrapping It Up

Now that we have overviewed both the products, it is now time to tell you the ultimate winner. It is none other than Bondic. There are several reasons that make Bondic a better option to choose from as compared to the JB Weld. 

A couple of which are:

JB weld takes really long to cure, whereas Bondic just takes about 4 seconds when exposed to UV light. 

For JB Weld to work well, the surface needs a thorough work which is not really the case with Bondic. 

Hopefully, this comparison guide will help you in picking up one of the two products, viz Bondic and JB Weld, that can work the best for you and your needs.

Here are the Top Alternatives for Bondic – check now.

Frequently Asked Questions

Is Bondic® dishwasher friendly?

Yes, after the Bondic® material has 100% cured it is completely waterproof and safe to put into the dishwasher. Just ensure the bond is strong enough to withstand the pressure of the dishwasher.

How many uses will I get out of one tube of Bondic®?

If it’s small repairs you’ve got planned, (iPhone cables, widgets, gadgets, etc.), you’ll get dozens of uses. Each tube contains about 80 drops of material. A larger repair (like an entire bookshelf) may require one or two tubes.

Leave a Reply

Your email address will not be published. Required fields are marked *